Generex CS121BL User Manual Download Page 20

Page: 20 / 166

Figure 6:

HTTP - UPS Model & System Settings

Apply your settings with the button at the right side.

Change to menu “Network & Security” and specify IP-address, Gateway and Subnet Mask

to the CS121-adapter.

Figure 7:

HTTP - Network & Security Settings

Apply your settings with the button at the right side.

Change to menu “Save Configuration” and click “Save Configuration”.

3.3.4

Configuration using Telnet / MS-HyperTerminal

Use of Telnet,

enter the command: „telnet <IP-Address>“, whereas <IP-Address> is in the

configuration mode set to 10.10.10.10. Please note, that since CS121 firmware version 4.x, the
basic settings (IP address, network settings) are at present only.

Summary of Contents for CS121BL







































































































































































Search results

Summary of Contents for CS121BL

Reviews:

Related manuals for CS121BL

Brands by name

Popular brands

Generex CS121BL, User Manual

Search results

Summary of Contents for CS121BL

Reviews:

Related manuals for CS121BL

Brands by name

Popular brands