1
Outdoor
1
2
1A
3
4
5
Installation Instructions for
Urbandale Outdoor Post (LED)
1.2
OL13707-LED
OL13707-L1
Remove the inner assembly from the fixture by loosening the fixture screws.
Insert the glass panels into the LED assembly housing and secure them in place using the clips.
Insert the
into the fixture and secure it in place using the housing screws.
inner assembly
Connect the blue driver wire to the white fixture wire with a wire nut.
Connect the red driver wire to the black wire with a wire nut.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white driver wire to the neutral power line wire with a wire nut.
Connect the black driver wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in the driver and all wiring.
6
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
7
8
4
POST
POST SCREW
5
7
8
3
9
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is safety listed for wet locations.
DRIVER
9
FIXTURE SCREW
GLASS PANEL
INNER
ASSEMBLY
CLIP
3
2
9
