GENERALTOUCH TECHNOLOGY CO., LTD
Issued by: Customer Service Department 7
/
22 Issued Date: 2013.10.14
发行部门：客户服务部
发行时间：
2013.10.14
SOP for GeneralTouch SAW Touch Screen Assembly
吉锐声波屏安装作业指导书
1. Disassemble the front frame and the back cover of the monitor.
拆下显示器的前框和后盖。
2. Assemble the touch screen
安装触摸屏
1) The front view of the LCD panel is shown as below. Check every metal frame of the LCD panel to make
sure there is no bump. If so, please grind it carefully to make sure the metal frames of LCD panel are
perfectly flat and smooth for next operation. If there is PCB board on the metal frame, please remove it
at first.
下图是液晶显示面板的正面视图。检查液晶显示面板的每一条金属边框，确认没有任何突起。如果有突
起，请小心地磨掉，保证液晶显示面板的边框十分的平坦和光滑，以便下一步操作。如果金属边框上有
电路板，请先移除。
2) Stick the double-sided adhesive tapes onto the metal frame of the LCD panel and keep a 1~2mm
distance away from the inner edge of the metal frame as shown below. Please stick the double-sided
adhesive tapes straightly and tightly to prevent the intrusion of the dust and moisture, and make the
joints adhere to each other closely.
如下图所示，将双面胶粘贴在液晶显示面板的金属边框上，并与金属边框内侧保留
1~2mm
的间隙。请
又紧又直地粘贴双面胶以防止灰尘和水汽的进入，同时将接头严密地粘贴在一起。
Metal Frame
，金属边框
