2
1 Specifications
1-1 Technical specifications
Table 1-1 Technical specifications @25°C
Item Description
Input voltage
3.3 VDC ± 5%
Scanning current
75mA typical/85mA maximum
Standby current
<8
μ
A
Laser
650nm laser diode
Scan rate
100±10 scans/second
Scanning angle
±50°, ±65°, ±35°
(Skew, Pitch, Roll)
Decode capability
UPC-A, UPC-E, EAN-13, EAN-8, ISBN/ISSN, Code 39, Code 39 full ASCII,
Code 32, Trioptic Code 39, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5,
Codabar (NW7), Code 128, Code 93, Code 11(USD-8), MSI/Plessey,
UK/Plessey, UCC/EAN 128, China Post, GS1 DataBar (formerly RSS) variants
Indicator interface
To control external Beeper and LED
Interface supported
UART
Scan mode
Good-read off, Momentary, Alternate, Continuous, Host
Dimensions
Height × Width × Depth: 12.0mm × 21.6mm × 15.5mm (maximum)
Weight
8.00±0.25g
Cable
Tapered 12-pin flex strip (12 x 0.5mm)
Temperature
Operating: -10°C to 60°C (-4°F to 140°F);
Storage: -40°C to 70°C (-40°F to 158°F)
Humidity
5% to 90% (non-condensing)
Programming method
Method I: Manual (scanning special barcode in sequence)
Method II: send command via UART interface
Firmware upgrade
Online
Decoding depth
& Max. resolution
(1 mil = 0.0254 mm)
4 mil: 42- 75 mm
5 mil: 40-105 mm
10 mil: 10-250 mm
15 mil: 23-380 mm
20 mil: 35-490 mm
30 mil: 30-650 mm
55 mil: 75-900 mm
See section of “1-3 Decode zone”
IEC 60068-2-6
Un-powered engine withstands a random vibration along each of the X, Y and Z
axes for a period of one hour per axis, define as follows:
20 to 80 Hz
Ramp up to 0.04G
2
/Hz at the rate of 3dB/oct
80 to 350 Hz
0.04G
2
/Hz
Mechanical vibration
350Hz to 2000Hz
Ramp down at the rate of 3dB/oct
Mechanical shock
IEC 60068-2-27
Shock pulse: 0.5ms, Maximal acceleration: 1500G, Shock direction & time:
±X-axis, ±Y-axis, ±Z-axis, 3 times for each direction, total of 18 times.
