26
6-6 UPC-A
Read:
Format
System character
Data digits (10 digits)
1 check digit
Check digit verification: The check digit verification is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Code ID is a one-or-two-character string used to represent the barcode type upon a
succeeding reading. If Code ID transmission is expected, Code ID transmission must be set Enable.
Refer to the section of “6-29 String transmission” for details.
Insertion group selection: Refer to Global insertion group selection of the chapter of “6-4 Hand-held scan
& some global settings”.
Supplement digits: The Supplement digits barcode is the supplemental 2 or 5 characters.
Format
System character
Data digits (10 digits)
Check digit
Supplement digits 2 or 5
Truncation/Expansion:
Truncate leading zeros- The leading “0” digits of UPC-A data characters can be truncated when the
feature is enabled.
Expand to EAN-13- It extends to 13-digits with a “0” leading digit when the feature is enabled.
Truncate system character- The system character of UPC-A data can be truncated when the feature is
enabled.
Add country code- The country code (“0” for USA) can be added when the feature is enabled.
