General Photonics PSY-201 User Manual Download Page 19

Page: 19 / 105

PSY-201 User Guide

GP-UM-PSY-201-11

Page 19 of 105

3.3 Functions

The polarization measurement and control functions and setup options are described in

more detail in this section.

Polarization Measurement

When the PSY-201 is first powered on, after initialization, its default mode is polarization

measurement.

This measurement display can also be accessed at any time by pressing the MEAS button.

Normalized Stokes parameters s1, s2, and s3 are displayed in the first row. The second row shows
two user-configurable parameters. For each of these positions, the user can choose to display
DOP, Power, Azimuth, Ellipticity, DLP, DCP, dREF,

, and

. The display parameters can be

selected by using the arrow keys.

While in the measurement display, the MEAS button can be used to pause/resume display

updating. A “||” icon above the “L” indicates that measurement is paused.

In addition to the front panel display, measured data can be displayed on a Poincaré

sphere or virtual oscilloscope plot using the PolaView™ software. This is useful for tracking SOP
evolution patterns or fast changes in polarization.

If the input optical power is out of range, the parameter display positions will be blank and

a “PL” or “PH” indicator will appear on the right center of the screen.

Power low

--.--- , --.---, --.---

DOP: ---.-

P: --.--

dBm

POL

0.132, -0.548, 0.826

DOP: 100.0

P: 1.00

dBm

POL

Function paused

Local control

Polarimeter function

0.132, -0.548, 0.826

DOP: 100.0

P: 1.00

dBm

POL

L

Summary of Contents for PSY-201










































































































Search results

Summary of Contents for PSY-201

Reviews:

Related manuals for PSY-201

Brands by name

Popular brands

General Photonics PSY-201, User Manual

Search results

Summary of Contents for PSY-201

Reviews:

Related manuals for PSY-201

Brands by name

Popular brands