Additional Features
Overview of Additional Features
5-2
SpectraComm SDT
076R174-000
Installation and Operation Manual
Issue 4
Authentication Protocol
In addition to local authentication where the usernames and passwords reside on each individual
SC-SDT device, SC-SDT can be configured for authentication. This capability supports
the CISCO protocol for authentication between the SC-SDT device and the
server. When is enabled, the server becomes the central point for managing
network-wide usernames and passwords. This is especially useful when provisioning SC-SDT
devices in large networks.
usernames and passwords are authenticated for all access methods: craft, Telnet, and
HTTP. You must be logged in with ADMIN privileges to access SC-SDT’s commands.
Detailed information and configuration procedures are provided in the paragraphs below.
•
For help in setting parameters, type:
configure ?
•
To show the status of , type:
show
Figure 5-1
Help and Status Displays for
Summary of Contents for SpectraComm SDT
Page 73: ......
