Owner’s Manual for 10 Ton Kinetic Splitter
5
General Information and Setup
Section 2: General Information and Setup
Specifications
HP
2
Output Torque
.025 in-lbs @ Full Load
Voltage
110
Full Load Current
14.5A
Output Power
1060W
Hertz
60HZ
Phase
1
Overload Protection
Thermal Breaker
Outlet Cord
6 ft (1.8 m)
Frame Gauge
3 mm
Belt Size
A-1180
Flywheel Weight
12.5 lb (5.6 kg)
Flywheel RPM*
490
Maximum Log Length
16 in (41 cm)
Maximum Log Diameter**
12 in (30.48 cm)
Cycle Time
1 second
Splitting Ability
Out Splits 10 Ton Hydraulic
Wedge Height
5 in (12.7 cm)
Wheel Size
6 in (15.24 cm)
Machine Height
24.5 in (62.23 cm)
Machine Length
49 in (124.46 cm)
Machine Width
11.875 in (30.16 cm)
Weight
132 lb (59.87 kg)
*Per flywheel.
**The diameter listed is indicative of the maximum suggested size. A small log can be difficult to split when it contains knots or a
particularly tough fiber. On the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the
maximum indicated above.
