User Manual
GWR High Speed Cellular Router Series
70
Maintenance
The GWR Router provides administration utilities via web interface. Administrator can setup basic
router’s parameters, perform network diagnostic, update software or restore factory default settings.
Maintenance
– Device Identity Settings
Within
Device Identity Settings Tab
there is an option to define name, location of device and
description of device function. These data are kept in device permanent memory.
Device Identity Settings
window is
shown on
Error! Reference source not found.
.
Device Identity Settings
Label
Description
Name
This field specifies name of the GWR Router.
Description
This field specifies description of the GWR Router. Only for information purpose.
Location
This field specifies location of the GWR Router. Only for information purpose.
Save
Click
Save
button to save your changes back to the GWR Router.
Reload
Click
Reload
to discard any changes and reload previous settings.
Table 24 – Device Identity parameters
Figure 46– Device Identity Settings configuration page
Maintenance
– Authentication
By
Administrator Password
Tab it is possible to activate and deactivate device access system
through
Username
and
Password
mechanism. Within this menu change of authorization data
Username/Password is also done.
Administer Password
Tab window is shown on
Error! Reference source
not found.
.
NOTE: The password cannot be recovered if it is lost or forgotten. If the password is lost or
forgotten, you have to reset the Router to its factory default settings; this will remove all of your
configuration changes.
