User Manual
GWR High Speed Cellular Router Series
60
does match, then the next rule is specified by the value of the policy, which can
be one of the values ACCEPT, DROP, REJECT. ACCEPT means to let the
packet through. DROP means to drop the packet on the floor.The REJECT
policy works basically the same as the DROP policy, but it also sends back an
error message to the host sending the packet that was blocked.
Distributed DoS
Enable
This box enables Distributed DOS
Maximum average
matching rate
Maximum average matching rate: specified as a number, with an optional time
unit: second, minute, hour, or day; the default is 3/hour.
Maximum initial
number of packets to
match
Maximum initial number of packets to match: this number gets incremented by
one every time the limit specified above is not reached, up to this number.
Action
Back
Click
Back
to return on firewall home page
Reload
Click
Reload
to discard any changes and reload previous settings
Save
Click
Save
to save your changes back to the GWR Router
Table 19 – Firewall parameters
Figure 38– Firewall configuration page
