User Manual
GWR High Speed Cellular Router Series
48
Figure 29– IPSec Settings
VPN Settings / IPSec Settings
Label
Description
Tunnel Number
This number will be generated automatically and it represents the tunnel number.
Tunnel Name
Enter a name for the IPSec tunnel. This allows you to identify multiple tunnels
and does not have to match the name used at the other end of the tunnel.
Enable
Check this box to enable the IPSec tunnel.
Local Security gateway
type
When
SIM Card
is selected the WAN (or Internet) IP address of the Router
automatically appears. If the Router is not yet connected to the GSM/UMTS
network this field is without IP address.
Local ID Type
Authentication identity for one of the participant. Can be an IP address or fully–
qualified domain name preceded by @.
IP Address From
Select SIM card over which the tunnel is established.
Local Security Group
Type
Select the local LAN user(s) behind the Router that can use this IPSec tunnel.
Select the type you want to use: IP or Subnet.
