User Manual
GWR High Speed Cellular Router Series
37
Figure 22– Wireless Settings configuration page
Wireless Settings
Label
Description
Mode
Enable wireless Access Point or Station.
SSID
SSID is a case sensitive, up to 32 alphanumeric characters length name that
identifies a wireless network.
Authentication Type
Choose Wi-Fi Protected Access II Pre-shared key mode (recommended), or Open
access.
Passphrase
Password for WPA2-PSK. Input from 8 to 63 printable characters.
Channel
Select one from list of legally allowed Wireless LAN channels using IEEE 802.11,
or Auto for automatic channel selection.
802.11 Protocol
802.11b has a maximum raw data rate of 11 Mbit/s. 802.11bg mixed mode
operates at a maximum physical layer bit rate of 54 Mbit/s, or about 22 Mbit/s
average throughput. 802.11bgn mixed mode has a maximum raw data rate of
72.2 Mbit/s.
Reload
Click Reload to discard any changes and reload previous settings.
Save
Click Save button to save your changes back to the Geneko Router. Whether you
make changes or not, router will reboot every time you click Save.
Table 7 – Wireless parameters
