User Manual
GWR High Speed Cellular Router Series
20
Figure 5 – Inserting SIM card
CONNECTING ROUTER
Warning: Use only the router’s box power supply.
* Connect antennas to router. Make sure to tighten antennas so that they are not loose.
* Plug AC/DC adapter cable into POWER CONNECTOR on your router.
* Plug AC/DC adapter into wall power socket.
* Display will turn on.
* Wait approximately 43-45 seconds for router to become fully operational.
* Plug one side of ETHERNET CABLE to ETHERNET CONNECTOR on a router.
* Plug other side of ETHERNET CABLE to Ethernet port on your computer.
*You will see on the screen if SIM card is present, cellular network types, signal level, current firmware
version (or IP address), uptime, number of LAN ports.
ADMINISTRATION WEB PAGE
* Add network 192.168.1.0/24 to the interface on your PC
* Optional: Ping 192.168.1.1 to check is the GWR router reachable
* Open your Web browser (e.g. Firefox, Chrome, Safari, Opera, or Internet Explorer) and open following
address: http://192.168.1.1
* When prompted for your login credentials, use "admin" (without quotes) for both username and
password.
* After logging in you should be able to see administration web page, which allows you to easily setup the
router.
