User Manual
GWR High Speed Cellular Router Series
18
The Display button can be used to see current firmware version or current ip address on the screen.
The Reset button can be used for a warm reset or a reset to factory defaults.
Warm reset:
If the GWR Router is having problem connecting to the Internet, press and hold the
reset button for a second using the tip of a pen.
Reset to Factory Defaults:
To restore the default settings of the GWR Router, hold the RESET button
pressed for a few seconds. Restoration of the default configuration will be signaled by writing messages on
the display and changing network status. This will restore the factory defaults and clear all custom settings
of the GWR Router. You can also reset the GWR Router to factory defaults using the Maintenance > Default
Settings screen.
Top Panel
Figure 4 – GWR Router top panel
On the GWR Router top panel is display, where we can read off Present SIM’s, active SIM, GSM
provider, SMS available, roaming, signal strength, GSM technology, interfaces, uptime, IP
addresses, firmware version.
