C-1
Gendex Dental Systems 4519-190-71193-7
C
Setting to work
Table of contents
C.1 Introduction
........................................................................................
C-1
C.2 Tools and instruments required
................................................
C-1
C.3 Controls and indicators
.................................................................
C-2
C.4 System initialization
........................................................................
C-3
C.4.1
Power on and default condition
.....................................................
C-3
C.4.2
Reset and dummy run
..............................................................................
C-3
C.4.3
Conditioning the x-ray tube
...............................................................
C-3
C.5 Adjustments and checks
...............................................................
C-3
C.5.1
Alignment of x-ray field pan mode
...............................................
C-3
C.5.1.1
Orthoralix 9200/Plus/Ceph
......................................................
C-3
C.5.1.2
Orthoralix 9200 DDE
......................................................................
C-4
C.5.2
Alignment of x-ray field transcan mode
..................................
C-5
C.5.2.1
Orthoralix 9200/Plus/Ceph
......................................................
C-5
C.5.2.2
Orthoralix 9200 DDE
......................................................................
C-6
C.5.3
Testing the centering of the system
...........................................
C-7
C.5.4
Alignment of X-ray field ceph mode
...........................................
C-8
C.5.4.1
Orthoralix 9200/Plus/Ceph
......................................................
C-8
C.5.4.2
Orthoralix 9200 DDE
......................................................................
C-8
C.5.5
Checking the centering lights with light
beam phantom
...............................................................................................
C-9
C.5.6
Aec ceph calibration
...............................................................................
C-10
C.5.7
Configuration chart
.................................................................................
C-10
C.5.8
AEC Calibration with Denoptix
.....................................................
C-10
C.6 Functional test
..................................................................................
C-10
C.6.1
Performance test
........................................................................................
C-10
C.6.2
Customer test
................................................................................................
C-10
C.7 Configuration chart
.......................................................................
C-11
C.1
Introduction
This section details the adjustment and test procedures to be
followed for setting up the Orthoralix systems.
C.2
Tools and instruments required
t 4UBOEBSETFSWJDFUPPMT
t %JHJUBMWPMUNFUFS
t *NBHFRVBMJUZQIBOUPN TVQQMJFE
t -JHIUCFBNQIBOUPN OPUTVQQMJFEDPEF
t *OUSBPSBMGJMNT
t 1BOPSBNJDGJMNT OPUGPS0SUIPSBMJY%%&
t $FQIGJMNT OPUGPS0SUIPSBMJY%%&
t 1BOPSBNJDDBTTFUUFXJUIPVUJOUFOTJGZJOHTDSFFOT OPUGPS0S
-
UIPSBMJY%%&
&
Printed on: 20 Apr 2012, 04:59:40 pm; Printed by: UWE.ZELLER
