genata Super power, Service Manual

Page: 25 / 51

www.genatamotor.eu 25
2. Rear absorber inspection.
Check the rear absorber to see whether any
bends, deformations, oil Leaking and loosen
happened to it. Meanwhile, user also need to
check whether the rear absorber is correctly and
tightly fixed.
3. BRAKE INSPECTION
User need to check whether the brake clearance
is within the range 15-20mm. If the test result is
not within this range, then, need to do
adjustments.
4. BRAKE EFFICIENCY AND INSPECTION
User can ride on the dry and plat road with low
speed, operate the front and rear brakes
separately to check the bake efficiency of each
brake.
If user do not have the suitable tools, please
send the motorcycle to the local maintenance
station to do inspection. In the condition of
lack of tools and skill, it
’s prohibited that users
dismantle or assemble the Super Power.
Otherwise, the parts, or even the motorcycles
will get some damages.
Warning

Front brake is disc brake. And when
the brake friction plates are worn to the
bottom of the groove mark, it needs to
be replaced with new friction plates.

When the rear brake rock arm
indicating plate is worn to the bottom of
the groove mark, then, need to be
replaced with new rear brake friction
plate.