genata Super power, Service Manual

Page: 24 / 51

www.genatamotor.eu 24

REGULAR INSPECTION AND SIMPLE
MAINTENANCE METHOD
To increase the vehicle
’s life time, ride with
safety and comfort, user need to do the regular
inspection for the motorcycle. If the motorcycle
has been not used for a long time, user also
need to do the regular inspection for the
motorcycle.
After the new Super Power run 300KM, need to
do inspection and maintenance.

BE CAREFUL TO DO THE INSPECTION
1. Choose the wide and flat ground to park the
vehicle.
2. When the user need to do the running
inspection, should lay it at a safety place, and
pay attention to the environment and situation
around the place at the same time.
3. If any unnormal problems were found in the
inspections, user must solve the problems first,
then, can ride the vehicle. If user cannot solve
the problems, can call the local dealer for
technical support, and then, solve to problem to
ride.

INSPECTION FOR MAIN OPERATION
UNITS
1. Check the front absorbers to see whether any
bends, deformations and damages happened to
the front absorbers.
User need to check whether the front absorbers
have damages, loosen and oil leaking.
Warning

Please switch off the electricity
before the battery take-out or put-in.
Also turn off the air switch.

If user cannot put-in the battery,
please do not try to put-in the battery
by force. Then, need to take-out the
batter to check whether the battery
is jammed by the bended wire
.