genata Super power, Service Manual

Page: 11 / 51

www.genatamotor.eu 11
SPEEDOMETER Function and Operation
1.STARTING LOCK
2.TEMPERATURE,TIME,KM/MILE INDICATION
3.SPEED 4.MAX SPEED
5.POWER AND VOLTAGEINDICATION
6.TOTAL MILEAGE 7.ONE TIME MILEAGE
8.SETECT PUSH-BUTTON INDICATOR
9.SETUP PUSH-BUTTON
10.TURNING INDICATOR
11.HIGH BEAM INDICATOR
12.FIRST GEAR
13.VOLTAGE TOO LOW INDICATOR

Regional Function
1. Power door locks, running in the ON
position, the vehicle can be started the motor
and function of each part.
2. Is used to display the environment
temperature, time, and km / mile system
3.4. Respectively show the current speed and
the maximum speed driving
5. Display the remaining battery voltage and
current
6.7. Shows the total mileage and vehicle
mileage single
8.9. For adjusting and setting instruments
10. On turn signal, the indicator flashes
followed
11. Open beam headlamps, the indicator lights
along
12. When the vehicle is in a file, this
indicator lights
13. When the battery voltage is lower than
45V, the indicator lights
Meter adjustment and setup time
：

Two buttons for the "SELECT" and "SETUP"
button