LRAD-100X
GENASYS INC.
Manual Part No.: 106457-00 Rev E
5
3.3 Audio Connections
The handheld MP3 player contains the power and audio controls for the LRAD-100X.
To install the audio cable, connect the cable between the MP3 player’s top-right AUDIO OUT
connector and the matching audio in connector on the bottom-left of the LRAD-100X (see
Figure 3).
The audio cable can be wrapped around the LRAD-100X’s rear plate for ease of transportation.
Figure 3 – Audio Cable attached to MP3 Player
When it is necessary to broadcast live speech, connect the included microphone to the MP3
player. Install the microphone by connecting the microphone’s cable to the MIC/USB connector
located on the top-left of the MP3 player (see Figure 4 on the following page).
