6
1.3 Physical Details
Front Panel
Figure 2: Front Panel
Status (Red)
LED
On
- Error condition.
Off
- Normal operation.
Blinking
- This LED blinks during start up.
Power LED
On
- Power on.
Off
- No power.
LAN LEDs
For each port, there are 2 LEDs
•
Link/Act
•
On
- Corresponding LAN (hub) port is active.
•
Off
- No active connection on the corresponding LAN (hub) port.
•
Flashing
- Data is being transmitted or received via the corre-
sponding LAN (hub) port.
•
100
•
On
- Corresponding LAN (hub) port is using 100BaseT.
•
Off
- Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN LED
On
- Connection to the Broadband Modem attached to the WAN (Inter-
net) port is established.
Off
- No connection to the Broadband Modem.
WLAN LED
On
- Idle.
Off
- Error - No Wireless connection available.
Flashing
- Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
