RemoDAQ-8031A/33A/34 User’s Manual
General Command Sets
Command Syntax Command Name
Command Description
Notes
%AANNTTCCFF Configuration
Sets the address,input range,
baudrate,dataformat,checksum status
3.1
#AA
Analog data in
Return the input value from the
module in the currently configured
data format
3.2
#AAN
Analog data in
Return the input value from the
module channels N in the currently
configured data format
3.3
$AA0 Span
calibration
Calibrates an AI module to correct
for gain errors
3.4
$AA0N
Channel N span
Calibration
Calibrates channel N of the module
to correct for gain errors
3.5
$AA1
Zero Calibration
Calibrates an AI module to correct
for gain errors
3.6
$AA1N
Channel N Zero
Calibration
Calibrates channel N of the module
to correct for gain errors
3.7
$AA2 Configuration
status
Return the configuration
parameters for the module
3.8
$AA30V.VVVV Span
adjust
Set the span adjust values for the
module (RemoDAQ-8031A)
3.9
$AA3NV.VVVV Span
adjust
Set the span adjust values for the
module (RemoDAQ-8033A/34)
3.10
$AA40V.VVVV Zero
adjust
Set the zero adjust values for the
module (RemoDAQ-8031A)
3.11
$AA4NV.VVVV Zero
adjust
Set the zero adjust values for the
module (RemoDAQ-8033A/34)
3.12
$AAF
Read firmware version
Return the firmware version code
3.13
$AAM
Read module name Return the module name
3.14
~AAO(data) Set
module name Return correct or error
3.15
~AAEV
Enable/Disable
calibration
Return correct or error
3.16
21
