GEMORO PLATINUM PRO1000V
10
Note: If you continue pressing the MODE/CAL
button, after “50” is displayed, the indicator will
scroll back to the units of measure mode.
2. With the desired sample size indicated on the
display (5, 10, 20, or 50), place the number of parts
equivalent to the desired sample size on the top
of the stainless steel weighing platform. Allow
the sample to stabilize for 3-5 seconds then press
TARE. The parts counting function is now set to
begin counting. In other words, at this stage if the
sample size was 5, if you added 10 more of the
parts onto the weighing platform the display would
then read 15.
3. In many cases (when counting very small or round
parts, etc.) it is more practical to use a scoop (tray
or container) to hold the parts you wish to count
and the PRO1000V can easily accommodate
this. Once the scale is on and stabilized, place
the desired scoop on the weighing platform and
press the TARE button to zero the weight of the
scoop from its display. Then continue pressing the
MODE/CAL button until the rEF 5 is displayed and
the scale may then begin its counting feature while
using the scoop as needed.