BrilliantSpa Black Diamond Manual
11
cleaner tank. To do so will produce a potentially hazardous
sputtering of water and wet steam.
6.
Never plug in and attempt to operate the BrilliantSpa Black
Diamond without water in its tank. If the BrilliantSpa Black
Diamond runs out of steam during operation, turn it off and
unplug it. Then allow approximately 30 minutes time to cool prior
to refilling the tank to its 11oz water capacity (if water is still in
the tank, while unplugged and cool, hold the BrilliantSpa Black
Diamond upside down over a sink to drain the remaining water in
its tank prior to adding 11oz of water). When removing the gray
fill cap after the BrilliantSpa Black Diamond has cooled, always
unscrew it slowly while maintaining an arms length distance from
it, allowing the steamer tank to very gradually release its pressure
until fully released.
7.
Never attempt to unscrew the gray fill cap and refill the
BrilliantSpa Black Diamond steam cleaner tank while it is still
hot and under pressure. There is a built-in safety feature that
prevents the gray fill cap from being removed while the steam
cleaner is hot.
8. Lift or move the BrilliantSpa Black Diamond only by its built-in
handles.
9. Always turn off and unplug the BrilliantSpa Black Diamond when
not in use.
10. This appliance is not for space heating purposes.
11.
DO NOT IMMERSE IN WATER.
12.
FOR INDOOR USE ONLY.
WARNING:
Danger of scalding!
Note: Recognized symbol for steam release located on steam activa-
tion button.
WARNING: To reduce the risk of electric shock, do not remove
the appliance’s cover. No user serviceable parts are inside. Only
authorized service personnel should perform possible repairs of this
appliance!
