User’s Manual
© Nippon Telesoft Co., Ltd. March 2003.
2. Changing the Fuse
The fuse unit is located at the bottom rear of the printer near the electrical cable.
【
Requirement
】
:Always turn off the power and disconnect the power cable before
changing fuse.
With a flathead screwdriver,
rotate the fuse cover counter-clockwise
and pull out the fuse case cover.
Pull out the fuse from the fuse case
and insert the equivalent replacement fuse.
When you change the fuse, please use a spare of them.
In case of out of spare, please use the equivalent one.
Return the fuse to its original position in the fuse case and reinstall the fuse cover by
turning clockwise until it won’t turn anymore.
14
2
5
0
V
3
A
