3DP-PEND-02 user manual
Read before the first use:
The tip of the pen can become quite hot! While the pen is used, please, do not touch the tip or
the surrounding area.
The hot tip of the pen might damage the painted surfaces, plastic, clothes etc.
The pen is not suitable for children under 8 years old unless they are supervised by adults.
Once the pen is no longer used, please, unload the filament, unplug and put the device into the
pen holder.
Do not use the pen in wet places where it can into contact with water due to a potential threat of
electric shock.
It is highly recommended to use this pen only with original Gembird
3
filament.
Package content:
3d pen
Power adapter
Holder
Red filament (3m)
Blue filament (3m)
Product features:
Lightweight and comfortable
– just 55g
Smart temperature sensing and heating
8 digital speed controls for more accurate and stable extruding
A single button push for continuous extrusion facilitates use
Embedded nozzle for easy maintenance
Patented lower temperature nozzle tip
Specifications:
Model NO.
：
3DP-PEND-02
Optimum temperature: ABS: 180-210
℃
，
PLA: 160-180
℃
Suitable filament: 1.75mm PLA/ABS
Power input
：
DC12V 2A 24W
Adapter power input: 100-250V 2A
