Compliance and Safety
Regulatory and Safety Notices
USA: Federal Communications Commission (FCC) Statement
This device complies with FCC part 15 FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
FCC Warning
Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception which can be determined by
turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device meets the FCC requirements for RF exposure in public or uncontrolled environments.
EU (European Union): European Community declaration of conformity
We Gemalto, located at 525 avenue du Pic de Bertagne,13881 Gémenos Cedex, France, declare under our
responsibility that the products: USB & BLE Smart Card Reader and SafeNet Reader CT1100 conforms to the
following product specifi cations:
Radio:
ETSI EN 300 328 (V1.8.1)
EMF
EN
62311
(2008)
EMC:
ETSI EN 301 489-1 v1.9.2 (2011-09)
ETSI
EN
301
489-17
v2.2.1
(2012-09)
EN
55022
(2010)
AC
(2011)
EN
55024
(2010)
EN
61000-4-2
(2009)
EN 61000-4-3 (2006) +A1 (2008) +A2 (2010)
Safety:
EN 60950-1 / A1 (2013)
Energy: Regulation
1275/2008
Restricted Substances:
EN 50581:2012
CE marking year:
2015
