Cinterion
®
LTE Terminals Hardware Interface Description
6.2 Restrictions
70
ELSxT_HID_v04
2018-09-04
Confidential / Preliminary
Page 67 of 102
6.2
Restrictions
Later enhancements and modifications beyond the certified configuration require extra approv-
als. Each supplementary approval process includes submittal of the technical documentation
as well as testing of the changes made.
•
No further approvals are required for customer applications that comply with the approved
LTE Terminals configuration.
•
Extra approval must be obtained for applications using other accessories than those
included in the approved LTE Terminals configuration (power supply, MMI implementation
supported by AT commands).
6.3
CE Conformity
The LTE Terminals ELS61T-E (contains the module ELS61-E2), ELS61T-E2 (contains the
module ELS61-E R2) and ELS61T-AUS (contains the module ELS61-AUS) meet the require-
ments of the EU directives listed below:
•
RED Directive 2014/53/EU
The LTE Terminals are marked with the CE conformity mark (without a notified body number):
The terminal can be use in all countries of the European Union. The Terminal will send only on
frequency bands, which are assigned by the network.
6.4
EMC
The LTE Terminals ELS61T-E (contains the module ELS61-E2), ELS61T-E2 (contains the
module ELS61-E R2) and ELS61T-AUS (contains the module ELS61-AUS) comply with the
equipment requirements specified in EN 301489-1, and -52 are covered by the RED Directive.
For details see
.
Conformity mark