Gemalto Cinterion EHS6 Command Manual Download Page 30

Page: 30 / 513

Cinterion

EHS6 AT Command Set



1.9 Errors and Messages



EHS6_ATC_V03.001

15/12/3

Confidential / Released

Page 30 of 513

1.9

Errors and Messages

The command result codes "

+CME ERROR: <err>

" and "

+CMS ERROR: <err>

" indicate errors related to mobile

equipment or network functionality.



The format of

<err>

can be either numeric or verbose and is selectable via

AT+CMEE



A result error code terminates the execution of the command and prevents the execution of all remaining com-

mands that may follow on the same command line. If so, neither "ERROR" nor "OK" result codes are returned

for these commands. A 30 seconds timeout will deliver "ERROR" when the input of a command is not complete.



Using the wrong command syntax may result in errors: For example, using the execute command syntax

although the command has no execute format, causes "ERROR" to be returned. Likewise, using the write com-

mand syntax although the command has no write format causes "+CME ERROR:

<err>

" to be returned.



Summary of Contents for Cinterion EHS6


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cinterion EHS6

Reviews:

Brands by name

Popular brands

Gemalto Cinterion EHS6, Command Manual

Search results

Summary of Contents for Cinterion EHS6

Reviews:

Brands by name

Popular brands