Rev. 00 01/22
16
•
Assembly / Connection
PH300
Connecting the pneumatic system
The compressed air must be free of oil and water!
The fresh powder hopper requires a connection to a sufficiently
dimensioned compressed air circuit.
In order to ensure correct operation, the main pressure regulator must be
set to a pressure of
6 bar
.
Fig. 6: Compressed air supply
Grounding of the fresh powder hopper
DANGER
Missing or incorrect grounding
A poor or missing ground connection can be dangerous to the
machine operator.
► Ground all metal parts in accordance with general local
regulations.
► Check grounding regularly.
A corresponding connection point at the rear of the container is reserved
for the potential equalization.
Fig. 7: Potential equalization
– connection point
Summary of Contents for PH300
