Gema OptiSelect Pro GM04-E, Operating Instructions And Spare Parts List

Page: 40 / 46

Rev. 00 01/20
40

Spare parts list OptiSelect Pro GM04-E
OptiSelect Pro GM04-E
– spare parts list
Only parts were included in the spare parts list, which the user
can replace himself without problems!
► If the powder gun cable is defective, it is to be completely sent
in for repair!
A
OptiSelect Pro GM04-E manual powder gun
– complete
incl. flat jet nozzle, brush and parts kit, without powder hose, with:
gun cable 6 m, rinsing air hose 6 m, negative polarity (
–)
1019 531
gun cable 12 m, rinsing air hose 12 m, negative polarity (
–)
1019 532
B Manual powder gun body OptiSelect Pro GM04-E (incl. cascade) with:
Gun cable 6 m, negative polarity (
–)
1019 526
Gun cable 12 m, negative polarity (
–)
1019 527
1 Gun body
– complete
1019 521
2 Cascade
– complete, negative polarity, incl. pos. 3
1016 911
3 Buffer 1017 704
4 Print holder
– complete
1017 690
5 Rear part 1017 683
6 Trigger
– complete
1017 686
7 Trigger cover 1017 688
8 Countersunk-head screw
– M4x6 mm
1017 698
9 SuperCorona connection 1017 684
10 Gun cable 6 m
– complete
1016 952
Gun cable 12 m
– complete
1016 953
11 Rinsing air connection 1017 656
11.1 Rinsing air hose 100 854*
12 Powder tube holder
– complete
1012 539#
13 Compression spring 1001 488
14 Clip ring 1007 960
15 Hose connection
– complete (incl. pos. 15.1)
1019 519#
15.1 O-ring for pos. 15 1000 822#
16 Threaded sleeve (see corresponding spare parts list)
17 Nozzle (see corresponding spare parts list)
18 Cable protection 1017 685
19 Screw
– M3x20 mm
1017 674
20 Contact strip 1018 707
21 Fitting bush 1018 708
Cleaning brush
– Ø 12 mm (not shown)
389 765
Parts set (not shown), consisting of: 1012 544
Cable clamp 303 070
O-ring 1000 822#