Rev. 00 01/20
16
Product description
OptiSelect Pro GM04-E
Flat jet nozzle with vented central electrode
The vented flat jet nozzle serves for the spraying and the charging of the
powder. The powder is charged by the central electrode (
E
). The high
voltage (
H
) created in the gun cascade is guided through the center
electrode.
fig. 5
In order to prevent powder from sintering on the electrode, compressed
air is used during the spray process.
The electrode rinsing air (
S
) adjustment on the gun control unit is
described in the corresponding operating manual.
Round jet nozzle with vented deflector and
vented electrodes
The vented deflector is used, to give the powder stream emerging from
the gun, a cloud formation. The powder is charged by radial arranged
electrodes (
E
). The high voltage (
H
) created in the gun cascade is guided
through the electrodes.
fig. 6
Since powder can accumulate on the baffle plate, it must be rinsed with
compressed air.
The electrode rinsing air (
S
) adjustment on the gun control unit is
described in the corresponding operating manual.
Summary of Contents for OptiSelect Pro GM04-E
