Gema OptiCenter OC09, Operating Instructions And Spare Parts List, Page: 7 / 112

Rev. 00 02/21
OptiCenter OC09 About these instructions

7
About these instructions
General information
This operating manual contains all important information which you
require for the working with the OptiCenter OC09. It will safely guide you
through the start-up process and give you references and tips for the
optimal use when working with your powder coating system.
Information about the functional mode of the individual system
components should be referenced in the respective enclosed documents.
These operating instructions describe all equipment and
functions of this OptiCenter.
– Please note that your OptiCenter may not be equipped with all
the described functions.
– Optional equipment is marked by double asterisks**.
Keeping the Manual
Please keep this Manual ready for later use or if there should be any
queries.
Safety symbols (pictograms)
The following warnings with their meanings can be found in the Gema
instructions. The general safety precautions must also be followed as well
as the regulations in the relevant instructions.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.