Rev. 00 08/17
MagicControl 4.0 (CM40)
Product description
11
Product description
Intended use
This plant control unit is designed exclusively for monitoring, operating
and controlling powder coating systems and associated components (see
also the chapter entitled "Technical Data").
The plant control is particularly suitable for the fully automatic coating of
any parts.
Fig. 1
Observance of the operating, service and maintenance instructions
specified by the manufacturer is also part of conformity of use. This
product should only be used, maintained and started up by trained
personnel, who are informed about and are familiar with the possible
hazards involved.
Any other use is considered non-compliant. The manufacturer is not
responsible for any incorrect use and the risks associated with such
actions are assumed by the user alone!
For a better understanding of the interrelationships in powder coating, it is
recommended that the operating instructions for all other components be
read as well, so as to be familiar with their functions too.
A summary of the directives and standards
This product was built according to the current state of the art. The
product is subject to the European directives and complies with the
following standards.
The product is suitable for the intended purpose and can be used in the
appropriate areas.
Summary of Contents for MagicControl 4.0
