Rev. 00 03/22
18
•
Product description
OptiFeed BigBag (FPS16)
Container specifications (big bag)
OptiFeed BigBag (FPS16)
Suspension system
4-point loops
Version
square, no partition walls, with
emptying funnel
Safety factor
min. 5:1 for disposable use
min. 8:1 for reuse
Material incl. suspension loops
conductive, R<10
8
ohm
Conveying performance
OptiFeed BigBag (FPS16)
Conveying performance
3500-5000 g/min for each pump
*
(according to the material to be
conveyed, suction and conveying
length, powder preparation etc.)
Conveying line
up to 8 m (5 kg/min conveying
performance)
8-16 m (4 kg/min conveying
performance)
16-25 m (3.5 kg/min conveying
performance)
Hose diameter Transport side
NW 16 mm
Suction line
up to 5 m
Material to be conveyed
Coating powder
Remaining quantity
< 5% of the original container
content
*
*)
The indicated values are guide values for each pump, possible
deviations are dependent on the powder type and the hose length!
The compressed air consumptions are listed in the corresponding
operating manuals
Environmental conditions
OptiFeed BigBag (FPS16)
Utilization
in the interior
Height
up to 2 000 m
Temperature range
+5 °C - +40 °C
(+41 °F - +104 °F)
Max. surface temperature
+85 °C (+185 °F)
Maximum relative humidity
80 % for temperatures to 31 °C,
linearly decreasing to 50 %
relative humidity at 40 °C
Environment
not for wet environment
Degree of pollution of the
intended environment
2 (in accordance with DIN EN
61010-1)
Summary of Contents for FPS16
