Gema CG22-C, Operating Instructions And Spare Parts List

Page: 41 / 74

Rev. 01 08/20
OptiStar All-in-One (CG22-C) Operation

41
Remote operation
There is the possibility to remotely control the device externally via CAN-
Bus.
Local operation in remote operating mode
In remote operating mode, local operation is limited to:
–
Display of the desired values of the current program
–
Error acknowledgment
Transfer to remote operating mode
–
During transfer from local to remote operating (and vice versa), the
powder output will cease so that the device is in a defined mode
after transfer.
–
Remote operating mode is signaled by the symbol REMOTE .
System release in network operation
The system release logic starts and stops the powder conveying and high
voltage. The release is determined due to the several internal and
external signals.
Signal Designation
Trigger Gun connected
System
release
External release Release on mains plug
Gun release
Command via Remote Interface
Gun ON/OFF Command via Remote Interface
Error lock Device error
System lock Parameter input
System
enable logic