GEM 567 servoDrive, Operating Instructions Manual

Page: 7 / 45

5 Order data - servoDrive
The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Order codes
1 Type Code
Control valve 567
2 DN Code
DN 8 8
DN 10 10
DN 15 15
DN 20 20
3 Body configuration Code
2-way angle body E
2-way angle body with bypass M
4 Connection type Code
Spigot
Spigot DIN 0
Spigot EN 10357 series A (formerly DIN 11850
series 2)/DIN 11866 series A
17
Spigot ASME BPE / DIN 11866 series C 59
Spigot ISO 1127/EN 10357 series C/DIN 11866
series B
60
Clamp
Clamp DIN 32676 series B 82
Clamp DIN 32676 series A 86
Clamp ASME BPE 88
5 Seal material Code
Actuator seal PTFE / seat seal FKM 4
Actuator seal PTFE / seat seal PTFE 5
Actuator seal PTFE / seat seal FKM / bypass seal
EPDM
bypass diaphragm code 13
43
Actuator seal PTFE / seat seal FKM / bypass seal
PTFE
bypass diaphragm code 54
45
Actuator seal PTFE / seat seal FKM / bypass seal
EPDM
bypass diaphragm code 17
47
Actuator seal PTFE / seat seal PTFE / bypass seal
PTFE
bypass diaphragm code 54
55
6 Voltage / Frequency Code
48 V DC D1
7 Control module Code
OPEN/CLOSE, positioner and process controller L0
8 Cable length Code
0.5 m 0
1.0 m 1
2.0 m 2
3.0 m 3
9 Control characteristic Code
Modified equal-percentage G
Linear L
10 Kv value Code
80 l/h AA
100 l/h AB
160 l/h BC
250 l/h BD
400 l/h BE
630 l/h CF
1.0 m³/h CG
1.6 m³/h DH
2.6 m³/h EJ
4.1 m³/h G1
11 Special version Code
Special version for 3A M
12 Surface Code
Ra ≤ 0.25 μm (10 µin.) for media wetted surfaces
*),
in accordance with DIN 11866 HE5,
electropolished internal/external,
*) for inner pipe diameters < 6 mm, in the spigot Ra
≤ 0.38 μm
1516
Ra ≤ 0.25 μm (10 µin.) for media wetted surfaces
*),
in accordance with DIN 11866 H5,
mechanically polished internal,
*) for inner pipe diameters < 6 mm, in the spigot Ra
≤ 0.38 μm
1527
Ra ≤ 0.4 µm (15 µin.) for media wetted surfaces,
in accordance with DIN 11866 H4,
mechanically polished internal
1536
Ra ≤ 0.4 µm (15 µin.) for media wetted surfaces,
in accordance with DIN 11866 HE4,
electropolished internal/external
1537
Ra max. 0.51 µm (20 µin.) for media wetted sur-
faces,
in accordance with ASME BPE SF1,
mechanically polished internal
SF1
5 Order data - servoDrive
www.gemu-group.com 7 / 45 GEMÜ 567 servoDrive