MU-A-RectiRail DL2-rev01a-Gb
18
/ 44
4.5.2
File naming
When saving a measurement or creating a DA5, a screen similar to the one below is
displayed:
- Select the relevant file
- Click in the input area
Ref.
③
- Enter the name of the measurement taken
Ref.
④
and click on OK
Ref.
⑤
This screen allows input of a 20-character identifier for reading. Available characters
are the 26 letters (upper case), the 10 digits, and 3 separating characters (space,
hyphen, underscore “_ ”).
Users browse with the joystick or directly on the screen. To add a character, highlight
it and press the “Validate” key via the joystick, or just click on it using a pen or finger.
Non-Western characters can also be used in names.
If a DA5 file has the suffix “
-x
“, this means it was created for a measurement taken in
grouped mode with 1 file per measurement group (see §0. 7 ). A “standard” DA5 file
does not have this suffix. The name “MyDocuments” may vary according to operating
system and language.
A new backup directory cannot be created directly in
RectiPDA
. New directories must be
created in the Windows file explorer (refer to the PDA user manual).
Name of the DA5 file in
which the backup will be
made.
4
5
3
