Gehl R105 (EU), Operator'S Manual

Page: 69 / 118

50950260/AP1216 65
Lubrication
Listed below are the locations, temperature ranges and types of recommended
lubricants to be used when servicing this machine. Refer to the separate engine
manual for more information regarding recommended engine lubricants, quanti-
ties required and grades.
Refer to the following figure for grease fitting locations. Wipe dirt from the fit-
tings before greasing them to prevent contamination. Replace any missing or
damaged fittings. To minimize dirt build-up, avoid excessive greasing.
Hydraulic
System
Use Petro Canada HVI60, Mobil DTE 15M or equivalent, which
contain anti-rust, anti-foam and anti-oxidation additives, and
conforms to ISO VG46.
Capacity: 8 U.S. gallons (30,0 liters)
Chaincase Oil
Use SAE grade 10W-30 motor oil.
Capacity (each side):
8 U.S. quarts (7,6 liters)
Grease Fit-
tings Use lithium based grease
Engine Oil
Important: Refer to the Engine Operator’s Manual for specific
engine oil recommendations.
Service Classification: API-CJ-4 SM
Capacity: 7.6 U.S. quarts (7,2 L)