Gehl GE 802, Operator'S Manual

Page: 48 / 52

PRINTED IN U.S.A.
5-2
90 8147 /0999
Engine will not start.
Insufficient engine power.
No fuel.
Battery power insufficient.
Fuel filter contaminated.
Pre-glow system not working.
Fuel line leakage.
Air filter contaminated.
Engine not at operating temperature.
Engine overheated.
Add fuel to tank; bleed fuel system.
Charge battery or replace if necessary.
Clean fuel filter.
Replace pre-glow system (contact authorized
repair center.).
Replace fuel line.
Clean air filter.
Warm up the engine.
Check cooling system.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
ENGINE
Engine oil pressure indicator
light comes on during opera-
tion.
Water temperature display light
comes on during operation.
Battery voltage light comes on
during operation.
Fuel light comes on.
Engine oil pressure too low.
Engine oil level too low.
Coolant level too low.
Fan blades rotate too slowly.
Air filter contaminated.
Alternator not charging properly.
Low fuel.
Stop engine immediately. Check oil level and
add oil if necessary. If oil level is correct, oil
pump may be inoperative.
Add oil.
Add coolant.
Adjust V-belt tension.
Clean air filter.
Adjust V-belt tension.
Add fuel.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
INDICATOR LAMPS
Oil or fuel leakage under
engine.
Oil losses from hydraulic
system.
Loose hose connections.
Seals or hoses damaged.
Loose hose fittings.
Seals, hoses or lines damaged.
Tighten hose connections.
Change seals or hoses and check engine oil level.
Add engine oil if required.
Tighten hose fittings. Check hydraulic oil level.
Add hydraulic oil if required.
Change seals, hoses and/or lines.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
SEALS & HOSES