manualshive.com logo in svg

gefran GPC, Configuration And Programming Manual, Page: 13 / 156

Share
Download
gefran GPC Configuration And Programming Manual Download Page 13

81901A “MSW_GPC-40/600A”_03-2021_ENG_page 11

2.  COMMISSIONING

2.1.  Commissioning operations

2.2.  Programming tool

2.2.1. 

GF_eXpress

GF_eXpress is the configuration tool for components, auto-
mation, drives and sensors in the Gefran catalog.
GF_eXpress tool is easy and intuitive thanks to a graphical 
interface, with devices divided according to product type 
and function. The choice of the product to be configured is 
made through a contextual menu with visual selection using 
real product images.
This management makes it possible to have a single device 
library for all Gefran products.
The software is available free of charge and can be down-
loaded from www.gefran.com, where it is always updated 
to the latest version available.

Applications

• 

Create a resource library of all Gefran devices on the 
plant floor (instrumentation, drives, sensors, power 
controllers).  of Gefran devices (instrumentation, drives, 
sensors).

• 

Tuning of adjustment parameters with on-line test and 
Trend.

• 

Parameter archive management for multiple configura-
tions.

Features

• 

Guided product selection.

• 

Simplified setting.

• 

Multilingual.

• 

Print parameters.

• 

Creation and saving of recipes.

• 

Network autoscan.

2.2.1.1.  System requirements

Minimum

Recommended

Operating 
system

Windows XP SP2, 
Windows Vista or 
Windows 7 (32-bit)

Windows 10 (64 
bit)

Processor

Intel Pentium
1 GHz

Intel Core i7 2.9 
Ghz or higher

RAM

2 GB

4 GB or more

Free hard 
disk space

2 GB

4 GB or more

Graphic res-
olution

XGA
(1024 x 768 pixels)

SXGA (1280 x 1024 
pixels) or higher

Browser

Microsoft Internet 
Explorer 8.0

Microsoft Edge or 
higher

Ethernet Port

1 RJ45

1 RJ45

DVD player

Yes

Yes

USB port

1 USB 2.0

1 USB 2.0

The simplest and safest way to commission GPC Advanced 
Power Controllers, after connecting the 24 Vdc power sup-
ply and a PC to the CPU, is to use the GF_eXpress software 
and its “SMART CONFIGURATION” function.

Through the “SMART CONFIGURATION” wizard menu, a 
safe working recipe can be created to test the controller 
and its load in just a few minutes, by answering some sim-
ple questions about the application.

Connection from PC to GPC, use cable Gefran F055002 
which is a USB to RS485 type cable.

Summary of Contents for GPC





























































































































































Reviews:

No comments