GEFRAN-SIEI ARTDriveG SBI-COP/DN-AGy Page 60 Instruction Manual Download

Page: 60 / 70

0 • SBI-COP/DN-AGy Card

Instruction Manual

Eng

lish

4.6 Alarms

4.6.1 SBI-COP/DN-AGy Alarms

The SBI-COP/DN-AGy interface provides one possible alarms:
- “Bus fault” alarm, is generated if the expected packet is not received

within the established time.

4.6.2 Drive Alarm Handling

No special treatment.
The alarm status can be detected by the master reading

H.034 - Drive

Status

parameter (bit 1).

4.6.3 Alarm Reset

The Alarm Reset is one of the drive standard functions. It is possible to reset

the drive by sending 1 to the H.501 (IPA 1030) parameter or by mapping the

Alarm Reset function on a Virtual Digital Input.

Summary of Contents for ARTDriveG SBI-COP/DN-AGy







































































Search results

Summary of Contents for ARTDriveG SBI-COP/DN-AGy

Reviews:

Related manuals for ARTDriveG SBI-COP/DN-AGy

Brands by name

Popular brands

GEFRAN-SIEI ARTDriveG SBI-COP/DN-AGy, Instruction Manual

Search results

Summary of Contents for ARTDriveG SBI-COP/DN-AGy

Reviews:

Related manuals for ARTDriveG SBI-COP/DN-AGy

Brands by name

Popular brands