GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Instruction Manual

Page: 163 / 387

Index
MENU MENU
MENU MENU
MENU
[Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 163
INTERFACE / Bit->Word
The Word Composing Block, “Bits->Word”, is useful to communicate, for example,
between Drive and APC option card or Drive and Field Bus option card.
This block allows the user to compose a word made of Drive ready, Drive ok, Ref is zero,
Speed is zero, by communicating on a single word.
The Bits->Word n Block has 16 inputs, where each of them can be connected to a signal;
the output of the Word compn Block contains the packed input bits.
Two “Bits->Word” blocks are available.
W ORD _ 0 B IT_ 0
B IT_ 15
B IT_ 1
B IT_ 1 4
W 0 c o m p o ut W o r d0 B 0 s r c
W o r d0 B 1 s r c
W o r d0 B 1 4 s r c
W o r d0 B 15 s r c
W ORD _ 1
W 1 c o m p o ut
............... .......
Figure C22: Bits->Wordn Block
C22 INTERFACE / Bit->Word
C22.00 Word0 B0 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 2100
Ipa 4000 - NULL = Default
It allows to connect the Bit 0 signal selected to the Word 0.
ª ª ª ª ª
Pick List 1
C22.01 Word0 B1 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 2101
Ipa 4000 - NULL = Default
It allows to connect the Bit 1 signal selected to the Word 0
ª ª ª ª ª
Pick List 1
C22.02 Word0 B2 src N/A RWS Ipa4000 PList 1 PIN V-F-S-B Full 2102
Ipa 4000 - NULL = Default
It allows to connect the Bit 2 signal selected to the Word 0.
ª ª ª ª ª
Pick List 1