![GEFRAN-SIEI ARTDrive Vector V2 400Vac Series Instruction Manual Download Page 146](http://html1.mh-extra.com/html/gefran-siei/artdrive-vector-v2-400vac-series/artdrive-vector-v2-400vac-series_instruction-manual_2205769146.webp)
Index
MENU
MENU
MENU
MENU
MENU
[Unit] Access Default
Min/Max
Format Reg.Mode Level Ipa
Parameter Name
Description
Chapter 6 Parameter • 146
ARTDrive V2 series - Instruction Manual
INTERFACE / Analog Outputs
Drive has 2 standard voltage outputs and 4 expanded analog outputs (1x and 2x = voltage
outputs, 3x and 4x=current outputs).
The Blocks of the analog outputs allow to turn an internal signal into a voltage signal (or a
current signal if the EXP-D20A6 option card is used) available on the terminal strip.
.
.
.
.
Analog Output 1
AO 1 scale
1
AO 1 hi lim
16383 cnt
AO 1 lo lim
-16384 cnt
AO 1 src
NULL
AO 1 inp
AO 1 mon
CALIBRATION TO +/-10 V OUTPUT
An out 1 mon (in counts) * An out 1 scale = An out 1 hi lim (in counts) = 10 V
An out 1 mon (in counts) * An out 1 scale = An out 1 lo lim (in counts) = -10 V
Figure C08: Analog outputs block
C08 INTERFACE / An Out 1
C08.00 AO 1 src
N/A
RWS
Ipa4000
PList 2
PIN
V-F-S-B
Easy 3570
Ipa 4000 - NULL = Default
It allows to connect the selected signal to the Analog output 1.
Refer to signals List 2 of
Pick List section.
C08.10 AO 1 scale
N/A
RWS
1 -10
1/0
PP
V-F-S-B
Easy 6012
Scale or multiplicative factor of Analog output 1.
C08.11 AO 1 hi lim
[cnt]
RWS
16383
0/32767
PP
V-F-S-B
Full
6010
Analog output 1 count value aimed at obt10V. Value must be higher than zero.
C08.13 AO 1 low lim
[cnt]
RWS
-16384
-32768/0
PP
V-F-S-B
Full
6011
Analog output 1 count value aimed at obtaining -10V. Value must be higher than zero.
C08.20 AO 1 inp
[cnt]
R
0
-32768/32767 PP
V-F-S-B
Easy 6013
Analog output 1 count value displaying.
C08.21 AO 1 mon
[%]
R
0
-100/100
PP
V-F-S-B
Easy 6014
Analog output 1 value displaying 100% is equal to 10V.
Summary of Contents for ARTDrive Vector V2 400Vac Series
