GEFRAN-SIEI ARTDrive Vector V2 400Vac Series, Instruction Manual

Page: 107 / 387

Index
MENU MENU
MENU MENU
MENU
[Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 107
[8] 15kW - 20Hp [10] 575V - 30Hp
[9] 22kW - 25Hp [11] 575V - 40Hp
[10] 30kW - 30Hp [12] 575V - 50Hp
[11] 37kW - 40Hp [13] 575V - 60Hp
[12] 45kW - 50Hp [14] 575V - 75Hp
[13] 55kW - 60Hp [16] 575V - 100Hp
[14] 75kW - 75Hp [17] 575V - 125Hp
[15] 90kW - 100Hp [18] 575V - 150Hp
[16] 110kW- 125Hp
[17] 132kW- 150Hp
[18] 160kW- 200Hp
[19] 250kW- 300Hp
[20] 315kW- 450Hp
[21] 500kW- 600Hp
[22] 160kW-200Hp
[23] 400kW- 500Hp
A14.02 Life time [hrs] R 0.00 0.00/0.00 PV V-F-S Easy 99
Drive life time accumulated with power on.
A14.03 Sys time-ddmmyy [h/m/s] R 0.00 0.00/0.00 PV V-F-S Easy 98
Time and date setting from PC configurator or serial communications.
Clock is active only when the Drive is powered on.
N
OTE
!
On a new regulation card the variable takes value: 00:00:00 (time) 010170 (date)
A14.04 Software version
Drive software version (factory installed), example: V 2.20.
A14.05 Drive type N/A R - 0/0 DK V-F-S Easy 300
32 400Vac drive parameters default
36 460Vac drive parameters default
37 575Vac drive parameters default
A14.06 Drive name N/A RWS 0.00 0.00/0.00 FK V-F-S Full 115
Parameter accessible via PC tool; a drive name can be assigned.
A14.07 Software status N/A R DrvVer 0/0 DV V-F-S Full 111
Software state factory use.
A14.08 Software type N/A R DrvVer 0/0 DV V-F-S Full 110
Software type factory use