background image

OPERATION NOTES

3

READ THESE NOTES BEFORE INSTALLING OR OPERATING

THE GEFENTV WIRELESS FOR HDMI - MULTI-ROOM SOLUTION

• 

Maximum extension distance is 100 feet (30 meters) with a clear

 

line-of-sight.

• 

Supported resolutions:

 

»

1080p60, 1080p50, 1080p24, 1080i60, 1080i50, 720p60, 720p50, 

576p50, 480p60 (no SD resolution on LR)

 

 

 

 

 

»

VESA: 1600x1200, 1366x768, 1280x1024, 1024x768, 800x600, 

640x480

• 

Obstructions such as walls and furniture may reduce performance and 

reception distance.

• 

DVI-D Support

• 

Gefen recommends placing both units into the provided stands, with 

the Gefen logo pointing down, to help maintain the strongest possible 

transmission signal.

• 

Interference caused by other RF products may reduce performance and 

reception distance.

• 

Use with multiple Sender units:

 

»

Can be used with a single Receiver unit to provide source-switching 

capability.

 

»

Up to 8 Senders are supported. Local RF interference can limit the 

number of Sender units that can be used. Each Sender unit needs

 

to be placed at least 1 meter apart for optimum performance.

 

»

US Models:  Up to 4 pairs of Sender and Receiver units can be 

operated in the same environment. Local RF interference can limit

 

the number of units that can be used. Each Sender unit needs to be 

placed at least 1 meter apart for optimum performance. If additional 

Sender / Receiver pairs are to be used, each set of units must be placed 

beyond the reception range (100 feet / 30 meters) of the other in order 

to prevent interference.

 

Continued on next page

NOTE:

 The 

Wireless for HDMI - Multi-Room Solution

 does not

support 

Standard-Definition resolutions.

Summary of Contents for GTV-WHD-1080P-LR






































Reviews: