page | 42
IP Mode (#GET_ / #SET_)
GET the current IP mode
Syntax
#GET_IP_MODE
IP_MODE 1
SET the IP mode to static or DHCP
Syntax
#SET_IP_MODE
Parameters
#SET_IP_MODE PARAM1
PARAM1 = 0 ~ 1
0 - STATIC
1 - DHCP*
Example
#SET_IP_MODE 1
Example Feedback
IP_MODE 1
MAC Address
Print the MAC address to the screen
Syntax
#GET_MAC_ADDR
Example Feedback
MAC ADDRESS IS: 00-1c-91-03-80-01
Netmask (#GET_ / #SET_)
GET the current netmask address
Syntax
#GET_NETMASK
Example Feedback
NETMASK 255.255.255.0
SET the gateway address
Syntax
#SET_NETMASK
Parameters
#SET_NETMASK PARAM1
PARAM1 = XXX.XXX.XXX.XXX (255.255.255.0*)
XXX - 0 ~ 255
Example
#SET_NETMASK 255.255.255.0
Example Feedback
NETMASK 255.255.255.0
Remote UDP IP Address (#GET_ / #SET_)
GET the current Remote UDP IP address
Syntax
#GET_REMOTE_UDP_IP
Example Feedback
REMOTE_UDP_IP 192.168.1.29
SET the Remote UDP IP address
Syntax
#SET_REMOTE_UDP_IP
Parameters
#SET_REMOTE_UDP_IP PARAM1
PARAM1 = XXX.XXX.XXX.XXX (255.255.255.255*)
XXX - 0 ~ 255
Example
#SET_REMOTE_UDP_IP 192.168.1.29
Example Feedback
REMOTE_UDP_IP 192.168.1.29
*Default setting.
Commands
