15
Splitter Connection Instructions
Video
1.
Using an HDMI cable, connect an Ultra HD source to the Input port of the splitter.
2.
Connect HDMI cables (not included), to Out 1 - Out 8 ports. The HDMI cables can then be
connected in any of the following ways:
h
Connect the HDMI cables to Ultra HD displays.
Power
1.
Connect the included 5V DC locking power supply to the 5V DC power receptacle on the rear
panel of the splitter.
2.
Connect the power supply to an available electrical outlet.
I
mportant
Cable quality is critical when handling 600 MHz HDMI signals . We
highly recommend Gefen Locking HDMI cables . They have been
designed and tested to work at 600 MHz and reliably transport the
full 18 Gbps throughput of HDMI 2 .0 .
