14
GTB-UHD600-18S-RT Test Pattern Button/Factory Reset
ID Name
Description
1
Test Pattern Button
Press and hold the
Test Pattern button
for 3 seconds to output a 1080p 60Hz Color Bar
Test Pattern, which also displays the splitter’s MAC address .
This Test Pattern can be used during installation or routine maintenance to ensure that the
displays are receiving a valid signal and to help making picture adjustments .
When the Test Pattern is on, its associated LED will be illuminated green . Press and hold for
3 seconds to deactivate .
2
Test Pattern LED
The LED will illuminate green when Test Pattern is activated
3
Factory Reset
Return all settings to factory defaults . Press and hold the
Test Pattern button
for 10
seconds .
