Controlling the Display from the Source Location
1. Connect the 3.5mm connector from the
IR In
port on the Sender unit to an automation
system with electrical IR output.
2. Connect the included IR emitter from the
IR Out
port on the Receiver unit to the IR
sensor on the display.
IR signals
IR Control
B
asic Oper
ation
HDMI cable
4K Ultra HD Extender
w/ POL and 2-way IR R
IR Out
IR Ext
HDMI
Power
Link
4K Ultra HD Extender
w/ POL and 2-way IR S
IR Out
IR In
HDMI
Power
24V DC
Link
HDMI cable
IR emitter
Ultra HD display
from Ultra HD source
from Automation
System
Sender unit
Receiver unit
Shielded CAT-5e cable (or better)
to
IR In
port
to
IR Out
port
Important
The
IR In
port, on the Sender unit, is designed to accept an electrical IR
connection from third-party automation devices. It will not work with Gefen
IR extenders.
Summary of Contents for GTB-HDBT-POL-BLK
