14
WALL MOUNTING INSTRUCTIONS
The GefenToolBox DVIKVM ELR Sender and Receiver may be mounted
vertically in a wall or cabinet with wood/drywall screws as shown in the diagram
above. There should be an inch or two of clearance between the edges of the
unit and any walls or vertical surfaces to allow for enough clearance for insertion
and retraction of cables at the DVI and RS-232 connectors.
For installation on a drywall surface, use a #6 drywall screw. It is recommended
when installing on a drywall surface that studs be used to secure the Splitter
should undue stress be applied when connecting and disconnecting HDMI
cables.